Basic Boat Info
Dimensions
Engines / Speed
- Make: Yamaha
- Model:
- Fuel: Unleaded
- Type: Outboard
Tanks
Other
Contact
Office
167 Rowayton Ave
Norwalk, CT, US, 06853
Tel:203-838-9038
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
With abundant storage throughout, in-floor fish boxes and a spacious aft cockpit, your pros list for buying the Pursuit S 248 just got a lot longer.
- Pursuit® Protection Plan:
5 Year Hull and Deck Structural Warranty
5 Year Blister Free Warranty
2 Year Limited Warrant - Pursuit Fresh White Gelcoat
- Hand Laminated Hull with Vinyl Ester Resin and Engineered Fabrics
- Infused Fiberglass Structural Grid System with Molded Finish and Integrated Bilge Water Management System
- Foam Filled Structural Grid
- 3 Ply Resin Infused Composite Transom System
- Integrated Transom Platform Extensions Outboard of Engine
- Boarding Ladder, 3 Step Telescopic, Mounted in Hull Platform
- Trim Tabs, Lenco Electric with Auto-Retract
- Rope Locker, Self-Draining
- Anchor Scuff Plate
- Horn, Electric with Oval Stainless Steel Cover
- Bow Eye, 1/2" 316L Stainless Steel
- Stern Eyes (2), 1/2" 316L Stainless Steel
- Bronze Thru Hull Fittings Below Water Line
- Chrome over Bronze Thru Hull Fittings Below 7 Degree Heel Line
- Stainless Clad Composite Thru Hull Fittings Above the 7 Degree Heel Line
- Bronze Garboard Drain
- Dedicated Transducer Location
- Molded One Piece Deck and Cockpit Liner with Non-Skid Pattern Area and Overboard Drains
- Self-Draining Cockpit with Bronze Ball Valve at Hull Side
- Hull and Deck Joint Mechanically Fastened
- Molded Single-Level Transom Platform/Splash Well with Storage Compartments with Fiberglass Hatches (Port and Center), and Integrated Rigging
- Rub Rail: High Density PVC with Solid 316L Stainless Steel Insert
- Cleats, 316L Stainless Steel - 8” Pop-Up (2) Stern, (2) Mid-Ship and (2) Bow
- Navigation Lights, 2 Mile LED (Port and Starboard)
- Flush Mounted Integral Anchor Locker with Fiberglass Lid
- Anchor Roller Chute with 8" Cleat, 14lb Galvanized Plow-Style Anchor and Rode (150' of 1/2" 8 Plait including 10' of 1/4" G4 Chain)
- Molded Transom Walkthrough and Hinged Transom Door, 316L Stainless Steel Latch and Magnetic Catch
- Bow Grab Rails, 316L Stainless Steel (Port & Starboard)
- Transom Grab Rail, 316L Stainless Steel (Starboard)
- Molded Recessed Hatches with Flush Hinges, Gaskets and 316L Stainless Steel Latches and Overboard Drain Tracks
- Custom Cockpit Upholstery with Dri-Fast Foam and Mesh Backing
- Under-Gunwale Rod Storage, Port and Starboard (fits 9.5' rods in lower holders)
- Folding Transom Seat with Patented Self-Adjusting Backrest
- Fiberglass Leaning Post with Tackle Storage Drawer and Integrated 45-Quart Yeti Cooler with Slide-Out Tray
- Helm Seating with Split Fold-Up Bolsters and Outboard Foliding Armrests
- 316 L Stainless Steel Cockpit Drink Holders
- Raw Water Outlet in Cockpit with Quick Connect Fittings and 25' Hose
- LED Cockpit Courtesy Lights
- Coaming Storage Boxes with Hinged Lids (Port and Starboard) - Fwd of Console
- Bow Seating, Console (double-wide) - Forward-Facing with Folding Armrests
- Bow Seating, Forward (Port & Starboard) with Fiberglass Hatches, Removable Cushions and Insulated Storage Below
- Bow Coaming Storage Boxes (Port & Starboard) with USB Charger (Port)
- Forward In-Floor Storage with Fiberglass Hatch and Stainless Steel Gas Spring
- Fire Extinguisher (Under Starboard Gunwale)
- Rod Holders, Stainless Steel (8) - Gunwales (4) and Transom (4)
- Fish Boxes, In-Floor (port & starboard, 11 gallons each) with Foam Insulation and Diaphragm Discharge Pump with Diverter Valve
- Live Well, Lighted 24 Gallon Recirculating
- Molded Fiberglass Hardtop
- Windshield, Full-Height Tempered Glass with Side Wings
- Powder Coated Structural Hardtop Supports with Grab Rails
- Overhead Storage Box
- Rod Holders (4)
- Anchor/Stern Light with Custom Stainless Steel Post with Burgee Rings, USA Flag and Ratcheting Mount
- Overhead Lights (2), Tri-Color LED
- Spreader Lights (2), LED - Fore and Aft Facing
- Dedicated Locations for Radar, Outriggers, VHF and FM Antennas
- Molded Fiberglass Aft Tilting Helm with Instrumentation Visor, Electronics Mounting Surface and Integrated Fiberglass Footrest
- Steering Wheel, 316L Stainless Steel on Tilt Sport Plus Helm
- 12V Switch Panel with Illuminated Rocker Switches
- Compass
- Trim Tab Control Panel with Indicator
- 12V Outlet and Dual USB Charger
- Drink Holders, 316L Stainless Steel (2) Extra Deep
- Storage Tray with Non-Slip Padded Surface
- Two Piece Fiberglass Door with Gasket and 316 Stainless Steel Locking Latch
- Molded Fiberglass Interior
- Console Entry Steps
- Head, SaniPottie with 5 Gallon Holding Tank (Removeable)
- Toilet Tissue Holder
- Storage Cabinet with Hinged Access Doors
- Integrally Switched 12V Overhead Light
- 12V Distribution Panel and Battery Switch
- Fire Extinguisher
- UL® Rated Fully Tinned, Color Coded Copper Wire
- Custom In-House Built, Heat Sealed, Mechanically Crimped, Color Coded Battery Cables
- Custom In-House Built, One Piece Electrical Harness with Waterproof Connectors and Chafe Protection
- Powder Coated, Aluminum, Screen Printed (Front & Back) Battery Switch and Breaker Panel
- Two Battery System: Engine (1) and House (1)
- Bonding System: Thru-Hull Fittings Below Waterline, Zinc Anode and Garboard Drain
- Grounding Bus Bar
- Electronics Fuse Block
- Molded Interior with Integrated Bilge Sump Area and White Gel Coat
- Molded Removable Access Hatch with Gasket
- Bilge Pumps: 1100 GPH (2) Low Profile with Automatic Float Switches and Stainless Steel Clad Composite Thru Hull Fittings
- Live Well Pump - 1100 GPH Tournament Series with Seacock and Thru Hull Fitting
- Raw Water Pump, Pressure Sensing with In-Line Filter
- EPA Compliant Lined 120 Gallon Rotomolded Fuel Tank with Engine Pickup, Shutoff Valve and Digital Level Indicator
- Custom Built Premium Fuel Feed Lines with Mechanically Crimped Fittings
- Yamaha® Water Separating Fuel Filter with Primer Bulb
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.